Communication Protocol Compliance Solutions
High speed digital communications require careful configuration and debugging. Interoperability is maintained through strict adherence to protocol standards. In addition to live debugging for performance and throughput, additional testing is often done to verify connections, transceivers, and systems to specifications. This is often a late stage development task and can be an ongoing manufacturing test step. Performance oscilloscopes provide compliance packages that can automate many of these test elements with the use of probes, fixtures, and additional instruments.
SIGLENT's SDS7000A and SDS7000AP series High Resolution Oscilloscopes provide up to 20 GSa/sec and up to 8 GHz of bandwidth for this type of automated testing. Check out our packages and solutions for your compliance test needs:
|
USB 2.0 Compliance packages for SDS7000A/AP Oscilloscopes
- USB2.0 decoding to bits
- High Speed, Low Speed, and Full Speed signal quality measurements with easy to configure UI from probes and connections to reports
- FX-USB2 fixture toolkit for test standardization
Options for the SDS7000A and SDS7000AP series instruments provide USB analysis with sampling up to 20 GSa/sec and 8 GHz. Utilize active and differential probes at critical steps in the process.
Download the full USB Compliance Guide to review steps, required instruments, setup, and probes.
Purchase the following options:
SDS7000A-USB2 for serial decoding
SDS7000A-CT-USB2 for automated compliance testing
FX-USB2 test fixture
|
Automotive Ethernet Compliance packages for SDS7000A/AP Oscilloscopes
- 100 Base-T1 and 1000 Base-T1 test configurations
- Tests include clock, transmitter, return loss, mode conversion, droop, and more
- FX-AMETH fixture toolkit for test standardization
Options for the SDS7000A and SDS7000AP series instruments provide Automotive ethernet compliance with sampling up to 20 GSa/sec and 8 GHz. Utilize active and differential probes at critical steps in the process.
Download the full Automotive Compliance Guide to review steps, required instruments, setup, and probes.
Also consider CAN-XL decoding for automotive applications.
Purchase the following options:
SDS7000A-CT-100BASE-T1 for automated compliance testing
SDS7000A-CT-1000BASE-T1 for automated compliance testing
FX-AMETH test fixture
|
100 Base-TX Ethernet Compliance packages for SDS7000A/AP Oscilloscopes
- 100 Base-TX test configurations
- Tests include template, peak voltage, overshoot, rise/fall, duty cycle, jitter, return loss, and more
- FX-ETH fixture toolkit for test standardization
Options for the SDS7000A and SDS7000AP series instruments provide 100Base-TX ethernet compliance with sampling up to 20 GSa/sec and 8 GHz. Utilize active and differential probes at critical steps in the process.
Download the full 100Base-TX Compliance Guide to review steps, required instruments, setup, and probes.
Purchase the following options:
SDS7000A-CT-100BASE-T for automated compliance testing
FX-ETH test fixture
|
1000 Base-T Ethernet Compliance packages for SDS7000A/AP Oscilloscopes
- 1000 Base-T test configurations
- Tests include peak, droop, and template tests with and without disturber as well as jitter, distortion, and return loss
- FX-ETH fixture toolkit for test standardization
Options for the SDS7000A and SDS7000AP series instruments provide 1000Base-T ethernet compliance with sampling up to 20 GSa/sec and 8 GHz. Utilize active and differential probes at critical steps in the process.
Download the full 1000Base-T Compliance Guide to review steps, required instruments, setup, and probes.
Purchase the following options:
SDS7000A-CT-1000BASE-T for automated compliance testing
FX-ETH test fixture
|
2.5G/5G/10G Ethernet Compliance packages for SDS7000A/AP Oscilloscopes
- 2.5G/5G/10G test configurations
- Tests include Jitter, output droop, linearity, distortion, and return loss
- FX-ETHS fixture toolkit for test standardization (coming soon)
| Contact us for more info on 2/5/10G Compliance tests |
Options for the SDS7000A and SDS7000AP series instruments provide 2.5G/5G/10G ethernet compliance with sampling up to 20 GSa/sec and 8 GHz. Utilize active and differential probes at critical steps in the process.
Download the 2.5G/5G/10G Compliance Guide to review steps, required instruments, setup, and probes.
Purchase the following options:
SDS7000A-CT-2.5/5/10GBASE-T for automated compliance testing
| Contact us for more info on fixtures and tools |
|
MIPI & DDR Compliance packages for SDS7000A/AP Oscilloscopes
- New test configurations being added
- Designed for use with 8 GHz oscilloscopes and active probes
| Contact us for more info on MIPI/DDR Compliance tests |
|
|
|
|
© 2025 SIGLENT TECHNOLOGIES - 6557 Cochran Rd Solon, Ohio 44139